Macro Layouts

Implementing Manufacturing Strategy   

The Macro Plant Layout Project

Macro LayoutThe elements of factory layout are simple; the tasks required to develop them is not.

These tasks and their sequence are remarkably similar for many projects. The scope, resources, methods, formality and time required varies according to size and complexity, but each task must be addressed in some way for good results.

Our methodology uses 25 standard tasks with modifications to suit particular projects. The figure below illustrates the tasks and their sequence. This is a "Model" for structuring the work in almost any macro-layout project..

The initial tasks (labeled "Information") plan the project and acquire basic information. These tasks also help to gain consensus and establish a factual basis for the layout. Process Mapping is an important tool here.

These initial tasks also begin the process of paradigm shift. The facts and information gathered and presented are often surprising. We use them to jolt the organization out of its complacency and tendency to "groupthink".

The second category ("Strategy") is only a single task. This is arguably the most important task but usually the most neglected. It determines the process and organization of the business. This is where management abandons the past and seriously re-thinks the manufacturing structure.

The third task group designs the spatial layout and associated systems. This is what most people consider as "Plant Layout". While this task group appears complex, it is actually straightforward-- IF the previous task groups have been well done.

This procedure produces at least several viable layouts. Each layout has advantages and disadvantages. The final task evaluates the layout options and makes a selection.

The entire procedure can take as little as two weeks or as long as six months. The time depends on project complexity and the strategic orientation of management.

You can find a complete explanation in Mr. Lee's book, "Facilities and Workplace Design - An Illustrated Guide."  Our seminar "Workcell Design for Lean Manufacturing" also addresses these tasks and their execution in-depth.

How Material Handling Fits

Material handling should integrate with the layout. We analyze material movement using Equivalent Flow Units and other quantitative methods. This helps select Containers, Route Structures and Equipment.Next Page

Macro Plant Layout Design

Generalized Macro-Layout Design Procedure

This procedure will develop excellent layouts with a high level of consensus. It saves time and frustration and will minimize backtracking.


Pump Products Macro Layout

Typical Macro-Layout

This macro-layout is based on a manufacturing strategy that uses workcells for the several thousand components that the company machines for pump. The hydrant and valve operation use dedicated production lines. Some operations within the pump department, such as testing, are centralized in functional areas because of the massive test equipment required.

■ ■ ■ ■ ■ ■ ■

The Strategos Guide To Value Stream and Process Mapping goes  beyond symbols and arrows. In over 163 pages it tells the reader not only how to do it but what to do with it.

Lean Briefing is only sent to those who subscribe or those who download from the Strategos website.

Books & Videos

Guide to Cycle Counting

Warehouse Planning Guide

Human Side of Lean Video

Contact Webmaster


SEP 2007     ©_Permissions